how to change ink on canon mp490 printer

#HOW TO CHANGE INK ON CANON MP490 PRINTER HOW TO#

The remanufacturedĬanon PG540XL black and CL541XL colour ink and the remanufactured Canon PG545XL and CL546XL ink are these such cartridges and may sometimes show the error message ‘low ink’, ‘ink has run out’ or ‘ink cartridge cannot be recognised’. The cartridge ‘chip’ is located in the actual cartridge and not the printer which makes the empty cartridge valuable for recycling or remanufacture. A remanufactured ink cartridge is a cartridge that was once an original Canon cartridge that has been factory cleaned, repaired if necessary, refilled and had its ‘chip reset’ and re-packaged. Not all Canon ink cartridges will give an error message when installed in a printer but it is more likely to occur in remanufactured ink cartridges. If you are covered by a money-back guarantee then you will have no problem and you will find that the supplier will do all they can to resolve the issue for you but will refund the money to you (after the return of the faulty cartridge) if they run out of options.Īll good online ink cartridge suppliers will do all they can to help and usually will resolve the situation and you will be happily printing with Canon compatible ink cartridges that didn’t cost the earth!

If you don’t have a second cartridge then contact your supplier to see if a replacement cartridge can be issued but make sure you make a note of the error messages that are coming up on the printer each time you insert the ink cartridges as this will help them identify what the problem is. It’s also possible that the ink cartridge may be faulty so if you have tried all of the above suggestions and have a second cartridge then it would be time to try that. The vast majority of the compatible Canon ink cartridges will work first time but on occasion you might have to try a bit of trouble-shooting to get it going. If the printer says the cartridge is damaged or will still not recognise the cartridge then remove the cartridge and gently wipe the copper area or the cartridge with a dry soft cloth (the area known as the ‘chip’) to remove any static that may have accumulated on it and re-insert to see if it will solve the problem. It may be that the ink volume will not display after you have done this (although sometimes it will continue to do so) but that is a minor inconvenience when you weigh up the savings on the cost of the compatible Canon ink cartridges. This will disable the printer’s cartridge recognition facility and you should be able to print happily without any further interruption.

The first thing you can do is remove the cartridge and try re-installing it to see if the printer will recognise it, if it will still not recognise the cartridge then simply hold down the stop button (this is the button with the triangle inside a circle) for a minimum of 7 seconds.

Press and hold the printer’s Stop / Reset button for at least 7 seconds to clear error message.

#HOW TO CHANGE INK ON CANON MP490 PRINTER HOW TO#

‘non-original Canon cartridge detected’Īny of the above messages will prevent you from printing.īelow is a quick guide on how to overcome this issue followed by more helpful information: Error messages and easy Quick Fix: Ink Cartridge Not Recognised: Sometimes when we insert a compatible, remanufactured or non-original ink cartridge into a Canon printer, the printer may not recognise the ink cartridge or the ink volume levels of the cartridge.

How to change ink on canon mp490 printer